Series 70 Modular Potentiometer
Cermet, or Conductive Plastic
|
|
|
Description |
The Series 70 MODPOT modules are 5/8" square, stackable potentiometer and switch modules. Combine up to 6 sections, with single or concentric metal shafts. Rotary, push-pull and momentary switch modules are available in standard and custom configurations.
|
|
|
|
Features: |
• |
Small size - 5/8" square, with up to 6 modules
|
• |
Switches - rotary, push-pull and push-momentary
|
|
Options: |
• |
Conductive Plastic or Cermet resistive elements. |
• |
Vernier drive - 4:1 or 16:1 |
• |
Rotary, push-pull, or momentary switch modules |
• |
Single shaft or concentric shaft available |
• |
Panel and Shaft Seals Available |
|
|
For additional information:
|
|
|
|
|
Electrical Specifications
|
Resistance Range
|
50 ohms to 10 Megohms Note: see PDF data sheet for more info
|
Resistance Tolerance
|
Cermet: ±5% or ±10% Conductive plastic: ±10% or ±20%
|
Resistance Tapers
|
Cermet: linear Conductive plastic: linear, logarithmic
|
Power Rating
|
Cermet: 2.0 watts Conductive plastic: .5 watt Note: see PDF data sheet for more info
|
Linearity
|
±5% independent for linear tapers with total resistance up to 1.0 megohm
|
Electrical Rotation
|
300°±5°
|
Effective Rotation
|
260°±5°
|
Working Voltage
|
Maximum continuous voltage 350 Volts RMS at sea level (power not to exceed rating)
|
Insulation Resistance
|
1000 megohms min. for clean and dry conditions at +25 °C
|
|
|
|
Mechanical Specifications
|
Housing Material
|
Molded Thermoplastic
|
Mechanical Rotation
|
300°±5°
|
Rotational Life
|
Life without load is 100,000 cycles (10% maximum resistance change)
|
Bushing Dimensions
|
Diameter: 1/4" or 3/8"
Length: 1/4", 3/8", or 1/2"
|
Shaft Dimensions
|
Diameter: 1/8" or 1/4"
Length: 1/4" to 2"
|
Shaft Ending
|
Standard flat, standard slot, plain round, or cross slot
|
Shaft Seals
|
Panel and Shaft Seals Available
|
|
|
|
|
|
|